Soundpacks and templates for legacy Novation synths: (Xio, X-Station etc)
set kore Midi Hardware Kontroller (Options-Hardware-MidiController)Knobs 8-15, Buttons 32-39, X-Y morph 58-59 (just type with your Keyboard or mouse), download novation beta SL MK2-editor,start it, klick on File-open and choose the SkaRulez-kore file, press edit on your Zero MK2, touch TmpGroup and choose a empty template, then click "upload" in the editor window, if you like it save with write on the MK2
two pages ! EDIT & Global
great to play the murf with this ...
For basic controls of the Novation UltraNova Synth on A SL MKII Midi controller (Was Made on A 61SL MKII) Note: The Touch Triggers Only seem to work while the Ultranova is in Touch Mode If you go Out of Touch Mode The Touch Triggers will all be turned OFF and will be OFF when re-entering Touch Mode (Yes, Touch Triggers can be turned ON and OFF with this template) Enjoy
This is for the V-synth and XT. These are all basic CC controls which are useful for performance. The Time Trip pad works perfect. D-beam use the sliders. Controls 1 and 2 use the lower knobs. HELP: If someone knows how to implement roland Sysex with Remote SL please modify this template. The V-synth midi implementation guide is here: http://lib.roland.co.jp/support/en/manuals/res/1811378/V-Synth_v2_MIDI_I...
Hope you like this template!!
Template for SonicCell performance mode.
Right faders: volume for parts 1-8. Right buttons: on/off for the 16 parts.
Left side: continous control of cutoff & resonance, and step control for attack and release. Also control for master transpose and volumen. Drum pads trigger notes.
Very uselful for live setup, can fool any keyboard into a master (using parts on/off to change sounds on the fly). Programmed with sysex messages (they should use 'Roland' sysex with checksum, but here uses ordinary sysex -that somehow works fine for the SonicCell-). Also useful working with midi files (turn tracks on/off, etc.).
Don't look for the PG-300, your Remote can do it!
This template makes available all MKS-50 Tone parameters and the most useful Patch parameters, and surpases the control capabilities of the hardware programmer PG-300.
ZIP file includes the template sysex file, a PDF with comments on how controls are organized (both in Spanish and English), and a JPG with a ‘paper’ clone of the template.
If you like it, let me know! Drop me a line firstname.lastname@example.org
This has both coarse (on a fader) and fine (on an encoder) control of depth.
Just a simple 1 page mapping. Nitro main edit parameters matched to Nocturn layout, mix control on X fader
A zip file containing 32 mappings for:
Analog Mastering Tools
Analog Signature Pack
Blue Tubes Dynamics Pack
Blue Tubes Effects Pack
Blue Tubes Equalizers Pack
Blue Tubes Analog TrackBox
Essential Studio Suite
Liquid Bundle II
Retrology Motown (Music & Film)
Rock Amp Legends
Zip file containing:
SuprEssor (and HR and LL)
Contains mappings for
Ratshack Reverb 2
Nocturn mappings for the uhbik fx bundle by u-he.
Maps the XY pads of the zebra 2 synth to the nocturns 8 buttons.
Mapping v1.0 for Native Instruments Traktor Scratch Pro 1.2.4 and
Novation 25 SLMKII with Automap Pro 3.4 by StrangeFreak (published on may 6, 2010)
2 Decks, EQ (with kills), Browse, Loops, 2 FX units
On 2 pages in group: mixer (channel 1)
An image of the mapping is included in the zip!
I used the above mentioned soft- and hardware to create this mapping. It should be compatible with all SLMKII's and ReMOTE SL's
The ZeRO SLMKII is a bit of a outsider in this list: the layout at the left side of the board is different from all other models, the mapping was not intended for this different layout and may appear less intuitive. The good part is, the ZeRO SLMKII has a crossfader which all other models lack. For the use of the fader as Traktor's X-fader, assign it to CC#34 in automap.
This mapping comes AS IS. Even to me it is a work-in-progress. I might change the mappings whenever I feel it should be changed. I encourage you to do the same. I created this mapping as a 2-deck mapping, solely because I have a 2-deck DJ-style. If you want a 4-deck mapping, go ahead, create one. Use my mapping as a starting-point if you like!
Note on awkward endless rotator behavior:
The two encoders in the browse-section should have been implemented as endless rotators, but due to the incompatibility between the Automap implementation of increment/decrement and Traktor's relative encoder modes (7Fh/01h or 3Fh/41h) this is currently impossible to do. I settled for the current settings because as long as you turn the rotator clockwise only, it works just the way I want. If you are as fed up with this limited implementation of the endless rotators as I am, send an email to Novation requesting for user defined increment/decrement values for the endless rotators in any future version of automap.
Any suggestions are welcome!
Covers most of the Synths controls.
Arranged from top left of Synth.
All well labelled , hope it helps someone.
72 Ch. mixermap for Cubase or Nuendo.
All 72 ch. have separete potis for vol, pan and send. All 72 ch. have separete button for solo, mute and record.
Hope your work will be faster...
greetz Jay Hyme
Remapping of IL's PoiZone subtractive software synthesizer. Moved the more commonly tweaked controls to encoder page A and buttons page B1. B2 houses the on & off controls for the gate step sequencer.
Korg M1 Legacy Collection Digital Edition mixing map for multi-mode. Controls: Volume, Pan, Dry/Wet Balance, Solo, Mute, etc.
Here an automap created with Traktor Pro. Great alternative to use Remote Zero SL as DJ. This 2 pages automap support 4 decks with whole effects and EQs. Have fun Cheers
This zip file contains a 2 page automap mapping for Traktor Pro and the Traktor midi map to import into Traktor.
I have setup LED feedback for the play button so the bli in time with the beat and a basic macro so when you select monitor for a track it also sets this as the active track.
Page one is Decks A + B
button = play, cue, monitor, sync
Dials = hi,mid,lo EQ and Gain
Page 2 is seperated into 2 sections
Left buttons is for active channel
shorten,lengthen loop activate loop and turn off loop
Right buttons is turn on and off FX 1 & 2 for channels a + b
filter A + B, active channel volume
FX 1 Dry/web and FX amount for each FX
Its a work in progress but has been tested in a club and worked well once I got used to it.