Soundpacks and templates for legacy Novation synths: (Xio, X-Station etc)
The four Dimension Pro Elements are mapped to pages 1-4 roughly in the order they appear in the plug-in. Most knobs and buttons are mapped plus course and fine tune. However, the zones and modulators are not mapped.
The mixer mappings are on page 5 encoders = fx sends,
pots = pan and volume and
faders = the elements fx input and wet/dry mix.
Page 6 is mapped to the mod fx and reverb.
If there is any zipper noise from the encoders, eg. cut off in an Element , try increasing the Max: from 256. This reduces the step size but increases the amount of encoder turning.
This is a mapping for Omnisphere I have created.
It has 2 files inside.
1. Omnisphere.automap, and
1. Load the Omnisphere.automap through automap and then select it to be the default control map for the client (you can do that through the file menu).
2. Copy the Omnisphere.midiLrn file to either :
HD/Library/Application Support/Spectrasonics/STEAM/Omnisphere/Settings Library/Presets/MIDI Learn/
User/Library/Application Support/Spectrasonics/STEAM/Omnisphere/Settings Library/Presets/MIDI Learn/
(This depends on wherever you installed your Omnisphere library).
Now the most important part (also the most irritating) is to load Omnisphere.midiLrn file in every instance of omnisphere in every project that you might work on.
There are five pages of mappings. I've tried to divide the sections to diff pages:
1st is for the Multi page in omni.
2nd for Filter
3rd for Oscillator
4th for LFOs (only first 4)
5th for Envelopes
There are a few random mappings:
like Arp On/Off is on page 3 and Layer A and B levels are on page 2.
So do check it out fully to know of other random maps.
Ive only added mappings of Aux 1 for each of the 8 multis. Would request you to add the rest yourself.
Its very easy.
First select the crosshair at the bottom of the omni (next to the Red A) so that it becomes red and you are in Automate Once mode on the automap window.
Next right-click on the knob or slider on omnisphere that u want to map and select 'Enable Host Automation'.
Next move the knob or slider on omni.
finally move the knob or slider on the SL that u want to map it to.
Now u have to move the knob or slider on SL fully in both directions till you see the corresponding knob or slider move in omni.
That should do it.
Mail me if you're finding this too confusing and ill try and help you out.
my email is firstname.lastname@example.org
Have fun with this kick ass plugin and your novation.
An in depth sound design based template for Sylenth 1
An in depth sound design based template for Alphakanal's Automat (Great Must Have Freeware)
An in depth sound design based template for Disco DSP's Discovery Mac
An in depth sound design based template for MOTU's MX4
An in depth sound design based template for Linplugs Alpha 3
ZIP-File containing 3 Automaps: Digidesign EQIII 1, 4 and 7 Band for Pro Tools 7/8. Optimized for mapping consistency: All the Parameter are at the same Place across the 3 EQ Version. More Automaps will follow.
If you have a comment for me, drop it at www.dyscode.com
Here another 5 pages automap for Spark sythesizer. This ensemble is one of Stephan Schmitt (the founder of NI and father of Reaktor) personal amazing creations. This automap is a little appreciation for this great synth. Automap works only in VST mode / no standalone support in Reaktor. Have fun Cheers
This is my first Automap3 automap for this great Freeware Synth.
It includes all Parameters that I could find and they should be quite reasonably assigned. I hope you find it useful...
There is a problem with the x-fader. It does not completely fade from deck2 to deck1. It´s a Mixvibes issue, not a hardware fault.
This is a straight forward Nocturn map for the Bass Station plugin, assigning most parameters from left to right as you see the plugin. Pay attention to the buttons as well, some are redundant, but might work better than knobs in certain situations. It is divided into 5 pages, with the last being the setup page, in case you want to tweak expressive control from your keyboard controller.
This is a Nocturn map of the Novation Bass Station, with the first 2 pages based off of the Remote 25 LE MIDI template. I posted another one that might be more straight forward, but decided to post both anyways. I just happen to have a Remote 25 LE, so I thought it might be useful to those already used to working with it.
I love the TAL Elek7ro Plugin, and when I downloaded the other one here and it didn't seem intuitive with the Nocturn, I redid it myself. Perhaps the other was designed for another controller...
Anyway, this has 6 pages, going from left to right, top to bottom, as follows:
Page 1: Oscillators
Page 2: Mixer
Page 3: Filter
Page 4: Envelopes
Page 5: LFOs
Page 6: Portamento, Transpose, Velocity and Bend Mods
I hope you find this one intuitive to design your own sounds, and feel free to give feedback.
Automapfile for Reason's NNXT. allows several options to work with zones like: chromatic automap, group... etc
This is a simple map for controlling channel strips in Logic 7/8/9 using Automap PRO for iPhone/iPod touch. Uses Automap HUI (need to add a Mackie Hui in Logic>Preferences>Control Surfaces>Setup...).
It includes basic transport controls plus a few extra features on pages 2+3. Incorporates some key commands, so probably requires Automap Pro 3.2 or higher.
In order to use the Next/Prev buttons to navigate through the channels, you'll need to set 'Channel Strip View Mode' to 'Single' in Logic>Preferences>Control Surfaces>Setup...
Use Nocturn to control mixer, devices, scenes, clips, master, tempo, etc. It includes python scripts that communicate with Live 8. You don't need to map manually any parameter. Under GPL license. Revision 1 that fix a bug with banks of less of 8 parameters. See also: https://forum.ableton.com/viewtopic.php?f=1&t=122831
Preset for the UAD Moog Filter
Preset for the UAD RE201 Roland Space Echo
Preset for Stylus RMX
This kit consist two files *.maping for automap and *.tks for traktor. I made it by myself. Hope you enjoy
Basic Logic Channel Strip EQ mapping. Uses the two faders to control the frequencies/gain of each node, and buttons to switch each node in/out.
The first page gives control over the Hi and Lo cuts. Subsequent pages give access to the other nodes in turn i.e. Low Shelf, the four middle eq bands and finally the Hi Shelf.
Logic Channel EQ. Everything in one single page...
Automap Mappings For HALion One
Made On Remote SL MKII
Page 1 = Controls For Low Band
Page 2 = Controls For Hi Band
Both Pages Contain EQ, Input/Output Gain ,Bypass ,Trigger mode ,Split Freq ,Listen ,Filter Type & Sens
Al located the same on Both Pages
Automap setup for RP-Verb Made On SL MKII
this is a selfmade mapping that suits my needs when dj´ing with traktor SCRATCH pro (not traktor pro).
hope it works for u.
Template for Sylenth1 section by section for easy navigation.
Just about every parameter mapped to 2 pages for the SL, laid out in a somewhat logical order.
Page 1: Osc, Filter, Amp
Page 2: LFOs, Effects, Playing modes, etc.
Use Nocturn to control mixer, transport, devices, scenes, clips, master, tempo, etc. It includes python scripts that communicate with Live 8. You don't need to map manually any parameter. Under GPL license. Revision 2 adds various improvements (see revisions.txt and readme.txt). See also: https://forum.ableton.com/viewtopic.php?f=1&t=122831
Improved Channel+LinearPhase EQ mappings for iPhone/iPod Touch. Easier to follow which nodes you're controlling as you flick through the pages. Last page is the same as the first (Lo+Hi Cuts etc). Pretty self-explanatory. Should work for Automap standard as well as Pro.
LA2A, 1176LN, Space Echo, Plate 140, EMT 250, Helios 69 and many more!
Instant mappings for Ableton Live devices, especially useful with racked devices and the 8 macro knobs.
Read the instructions in the readme. More info here: http://forum.ableton.com/viewtopic.php?f=1&t=92935&start=0&hilit=nocturn...
Three pages, grouped like the synth layout and in order of my personal amount of fiddling with.
Page 1 : Filter, Env, Arp
Page 2 : LFO, OSC
Page 3 : Bender, Arp, tune stuff
Also as a key feature the cross fader filter
Panic and some other buttons reoccurring
A three page setup for Nexus 2. First Page : Performance controls
Second Page : Filter and Amp Env
Third Page : Delay and Reverb
Due to the lack of automation capabilities of Nexus, nothing for the buttons or the LCD controls.
And here we have a mapping for our all time favourite drum machine, the 909 from D16.
I created 9 pages of trigger happy knob fiddling for your techno fun.
Page 1 : Levels and mute for 8 out of 10
Page 2 - 9 : complete controls for all drums including random threshold, plus Main volume in the middle and mute and solo buttons
Enjoy and please give some feedback
This is my attempt to control the bass beast from Spectrasonics.
I focused on performance controls and easy editing.
Spec. tools have no predefined CC IDs, so I included this file too.
You need to load this for every part you want to control.
Page 1 : Main page performance from left to right plus the 4 lower controls on buttons
Page 2 : Filter control and AMP envelope
Page 3 : Filter envelope and 1st Mod. envelope
Page 4 : LFO 1-4 , rate, depth, sync and +
I know its just a start but please try it and give some feedback.
We Came To Kill - Studio layout by Dusty of WCTK.
Top Knobs - Generator editing & Subtractive Synthesis
Bottom Knobs - Sound Modulation Control
First 4 Faders - Amp ADSR
Second 4 Faders - Filter ADSR
X/Y Pad - Cutoff & Mix
The Bass Station gets much more interesting when you ignore the presets and really tweak it.
Just a basic mapping.. I don't really use this synth so I didn't spend any time tuning it for usability. By Dusty of WCTK
Logic's Tape Delay all in one page
All controls (including hidden parameters) in one page.
Map for Acustica Audio Nebula3 and Nebula3 PRO.
Automap for FabFilter Pro-Q VST/RTAS plug-in.
Guru 1.6 Remote Zero SL.Hope u like it))